Applied Engineering Diploma
D40130
Day/Evening/Online/Full-Time
Fall Semester 1
| Course |
Class Hours |
Lab Hours |
Clinical Hours |
Credits |
MNT 110 - Introduction to Maintenance Procedures
MNT 110 - Introduction to Maintenance Procedures
This course covers basic maintenance fundamentals for power transmission equipment.
Topics include equipment inspection, lubrication, alignment, and other scheduled maintenance
procedures. Upon completion, students should be able to demonstrate knowledge of
accepted maintenance procedures and practices according to current industry standards.
Class: 1.00
Lab: 3.00
Credits: 2.00
|
1.00 |
3.00 |
|
2.00 |
BPR 115 - Electrical/Fluid Power Diagrams
BPR 115 - Electrical/Fluid Power Diagrams
This course covers sketching of detail and assembly drawings and reading of hydraulic,
pneumatic, electrical, mechanical, and piping schematics. Emphasis is placed on interpretation
and communication skills utilizing sketches, symbols, diagrams, and other related
topics. Upon completion, students should be able to read, demonstrate an understanding
of, and draw sketches and schematics commonly used in industry.
Class: 1.00
Lab: 2.00
Credits: 2.00
|
1.00 |
2.00 |
|
2.00 |
ELC 131 - Circuit Analysis I
ELC 131 - Circuit Analysis I
This course introduces DC and AC electricity with an emphasis on circuit analysis,
measurements, and operation of test equipment. Topics include DC and AC principles,
circuit analysis laws and theorems, components, test equipment operation, circuit
simulation, and other related topics. Upon completion, students should be able to
interpret circuit schematics; design, construct, verify, and analyze DC/AC circuits;
and properly use test equipment.
Class: 3.00
Lab: 3.00
Credits: 4.00
|
3.00 |
3.00 |
|
4.00 |
WLD 112 - Basic Welding Processes
WLD 112 - Basic Welding Processes
This course introduces basic welding and cutting. Emphasis is placed on beads applied
with gases, mild steel fillers, and electrodes and the capillary action of solder.
Upon completion, students should be able to set up welding and oxy-fuel equipment
and perform welding, brazing, and soldering processes.
Class: 1.00
Lab: 3.00
Credits: 2.00
|
1.00 |
3.00 |
|
2.00 |
|
|
|
|
Total: 10 |
Spring Semester 1
| Course |
Class Hours |
Lab Hours |
Clinical Hours |
Credits |
ISC 112 - Industrial Safety
ISC 112 - Industrial Safety
This course introduces the principles of industrial safety. Emphasis is placed on
industrial safety and OSHA regulations. Upon completion, students should be able to
demonstrate knowledge of a safe working environment and OSHA compliance.
Class: 2.00
Credits: 2.00
|
2.00 |
|
|
2.00 |
ELC 113 - Residential Wiring
ELC 113 - Residential Wiring
This course introduces the care/usage of tools and materials used in residential electrical
installations and the requirements of the National Electrical Code. Topics include
NEC, electrical safety, and electrical print reading; planning, layout; and installation
of electrical distribution equipment; lighting; overcurrent protection; conductors;
branch circuits; and conduits. Upon completion, students should be able to properly
install conduits, wiring, and electrical distribution equipment associated with residential
electrical installations.
Class: 2.00
Lab: 6.00
Credits: 4.00
|
2.00 |
6.00 |
|
4.00 |
DFT 119 - Basic CAD
DFT 119 - Basic CAD
This course introduces computer-aided drafting software for specific technologies
to non-drafting majors. Emphasis is placed on understanding the software command
structure and drafting standards for specific technical fields. Upon completion,
students should be able to create and plot basic drawings.
Class: 1.00
Lab: 2.00
Credits: 2.00
|
1.00 |
2.00 |
|
2.00 |
CIS 110 - Introduction to Computers
CIS 110 - Introduction to Computers
This course introduces computer concepts, including fundamental functions and operations
of the computer. Topics include identification of hardware components, basic computer
operations, security issues, and use of software applications. Upon completion, students
should be able to demonstrate an understanding of the role and function of computers
and use the computer to solve problems.
Class: 2.00
Lab: 2.00
Credits: 3.00
|
2.00 |
2.00 |
|
3.00 |
|
|
|
|
Total: 11 |
Fall Semester 2
| Course |
Class Hours |
Lab Hours |
Clinical Hours |
Credits |
HYD 110 - Hydraulics/Pneumatics I
HYD 110 - Hydraulics/Pneumatics I
This course introduces the basic components and functions of hydraulic and pneumatic
systems. Topics include standard symbols, pumps, control valves, control assemblies,
actuators, FRL, maintenance procedures, and switching and control devices. Upon completion,
students should be able to understand the operation of a fluid power system, including
design, application, and troubleshooting.
Class: 2.00
Lab: 3.00
Credits: 3.00
|
2.00 |
3.00 |
|
3.00 |
ELC 117 - Motors and Controls
ELC 117 - Motors and Controls
This course introduces the fundamental concepts of motors and motor controls. Topics
include ladder diagrams, pilot devices, contactors, motor starters, motors, and other
control devices. Upon completion, students should be able to properly select, connect,
and troubleshoot motors and control circuits.
Class: 2.00
Lab: 6.00
Credits: 4.00
|
2.00 |
6.00 |
|
4.00 |
MAC 141 - Machining Applications I
MAC 141 - Machining Applications I
This course provides an introduction to a variety of material-working processes that
are common to the machining industry. Topics include safety, process-specific machining
equipment, measurement devices, set-up and layout instruments, and common shop practices.
Upon completion, students should be able to safely demonstrate basic machining operations,
accurately measure components, and effectively use layout instruments.
Class: 2.00
Lab: 6.00
Credits: 4.00
|
2.00 |
6.00 |
|
4.00 |
PSY 150 - General Psychology
PSY 150 - General Psychology
This course provides an overview of the scientific study of human behavior. Topics
include history, methodology, biopsychology, sensation, perception, learning, motivation,
cognition, abnormal behavior, personality theory, social psychology, and other relevant
topics. Upon completion, students should be able to demonstrate a basic knowledge
of the science of psychology.
Class: 3.00
Credits: 3.00
|
3.00 |
|
|
3.00 |
-OR- PSY 118 - Interpersonal Psychology
PSY 118 - Interpersonal Psychology
This course introduces the basic principles of psychology as they relate to personal
and professional development. Emphasis is placed on personality traits, communication/leadership
styles, effective problem solving, and cultural diversity as they apply to personal
and work environments. Upon completion, students should be able to demonstrate an
understanding of these principles of psychology as they apply to personal and professional
development.
Class: 3.00
Credits: 3.00
|
3.00 |
|
|
3.00 |
|
|
|
|
Total: 14 / 14 |
Spring Semester 2
| Course |
Class Hours |
Lab Hours |
Clinical Hours |
Credits |
ATR 112 - Introduction to Automation
ATR 112 - Introduction to Automation
This course introduces the basic principles of automated systems and describes the
tasks that technicians perform on the job. Topics include the history, development,
and current applications of robots and automated systems including their configuration,
operation, components, and controls. Upon completion, students should be able to understand
the basic concepts of automation and robotic systems.
Class: 2.00
Lab: 3.00
Credits: 3.00
|
2.00 |
3.00 |
|
3.00 |
| COM 120 - Intro to Interpersonal Communication
|
3.00 |
|
|
3.00 |
|
|
|
|
Total: 6 |
